Losmandy GM8/GM11 Encoder Kit

Overview

When purchasing digital setting circles for your telescope, you’ll also need to have encoders installed on your scope – without these, your DSC has no way of interfacing with your telescope. The encoders are attached to your telescope’s axes and send signals to your DSC, letting it determine the position of your telescope.

The Losmandy GM8/GM11 Encoder Installation Kit is created specifically for Losmandy GM8/GM11 mounts.

When purchasing this kit, we will need to contact you to request your required encoder cable length.

Installation instructions can be downloaded here. Installation instructions for the latest model of the mount can be downloaded here.

What’s in the box

• 2 x encoders (311,296 steps)
• 1 x installation hardware set
• 1 x 50cm coiled encoder cable (stretches to 1.8m)
• 1 x installation instruction booklet